一次性口罩

Logistics conveyor belt



The English name conveying belt, also known as the conveyor belt, is a rubber and fiber, metal composite product used for carrying and transporting materials in a belt conveyor belt, or a composite product of plastic and fabric. Conveyor belts are widely used in cement, coking, metallurgy, chemical, steel and other industries where the conveying distance is short and the conveying volume is small.







Conveyor belts and belt conveyors are widely used in agriculture, industrial and mining enterprises and transportation industries to transport a variety of solid block and powder materials or articles, conveyor belts can be continuous, high efficiency, large dip angle transportation, conveyor belt The operation is safe, the conveyor belt is easy to use, the maintenance is easy, the freight is low, the transportation distance can be shortened, the construction cost is reduced, and manpower and material resources are saved.



Conveyor belt, English name conveying belt, also known as conveyor belt, is used in belt conveyor belt to carry and transport materials, rubber and fiber, metal composite products, or plastic and fabric composite products. Conveyor belts are widely used in cement, coking, metallurgy, chemical, steel and other industries where the conveying distance is short and the conveying volume is small.









product structure
This product is made of multi-layer hanged cotton canvas as the skeleton, and the rubber material with good surface coverage is made by vulcanization.

Conveyor belt series products include ordinary cotton canvas conveyor belt and nylon (NN) conveyor belt (divided into NN-100 type, NN-150 type, NN-200 type, NN-250 type, NN-300 type, NN-350 type, NN-400 type), polyester (EP) belt (divided into EP-100 type, EP-150 type, EP-200 type, EP-250 type, EP-300 type, EP-350 type, EP-400 type) , large dip angle (corrugated rib) conveyor belt, skirt partition conveyor belt, endless conveyor belt, pattern conveyor belt {Because of different materials and different inclination angles, the shape and height of the pattern are required to be different. Commonly used pattern conveyor belts such as: chevron pattern conveyor belt (herringbone conveyor belt including upper convex, lower concave herringbone conveyor belt), figure-shaped pattern conveyor belt, fishbone pattern conveyor belt, U-shaped pattern conveyor belt, cylindrical Pattern conveyor belt, pitting pattern conveyor belt, grass pattern conveyor belt, or according to user requirements}, water stop belt, PVC or PVG whole core flame retardant belt; and can provide a variety of special performance conveyor belt (general Flame-retardant conveyor belt, heat-resistant conveyor belt, burning-resistant conveyor belt, high wear-resistant conveyor belt, acid-resistant conveyor belt, alkali-resistant conveyor belt, cold-resistant conveyor belt, oil-resistant conveyor belt, high-temperature conveyor belt, high-strength conveyor belt and food Conveyor belt, Teflon conveyor belt, stainless steel conveyor belt, chain conveyor belt, conveyor belt).





Use industry
Special conveyor belt for automobile industry, special conveyor belt for battery, special conveyor belt for quick-frozen food, special conveyor belt for snack food, special conveyor belt for aquatic industry, special conveyor belt for tire industry, special conveyor belt for logistics industry, special conveyor belt for chemical industry, special for frozen food Conveyor belt, food conveyor belt, microwave conveyor belt, climbing conveyor belt, marble conveyor belt, corrugated paper conveyor belt, special conveyor belt for packaging industry, special conveyor belt for entertainment facilities, liquid

Special conveyor belt for body food, special conveyor belt for fruits and vegetables, special conveyor belt for vegetables, special conveyor belt for meat, special conveyor belt for mine, special conveyor belt for cement factory, special conveyor belt for garment factory, special conveyor belt for glass factory, special conveyor belt for injection molding industry And other automated production lines.



Use
Oil-proof conveyor belt, non-slip conveyor belt, climbing conveyor belt, acid-proof conveying heat-proof conveyor belt, cold-proof conveyor belt, anti-burn conveyor belt, anti-corrosion conveyor belt, moisture-proof conveyor belt, anti-low temperature conveyor belt, anti-high temperature conveyor belt , oil-resistant conveyor belt, heat-resistant conveyor belt, cold-resistant conveyor belt, low-temperature conveyor belt, high-temperature conveyor belt, acid and alkali conveyor belt, flame retardant conveyor belt.

By material
PVC conveyor belt, PU conveyor belt, polyethylene conveyor belt, plastic chain conveyor belt, modular net conveyor belt, polypropylene conveyor belt, nylon conveyor belt, Teflon conveyor belt, stainless steel conveyor belt.

Heat resistance
1. Heat-resistant conveyor belt: TI type resistance is not more than 100 degrees, T2 type is not more than 125 degrees, T3 type is not more than 150 degrees

2, high temperature conveyor belt: temperature resistance is not more than 200 degrees

3, anti-cavitation conveyor belt (metal core conveyor belt): temperature 200-500 degrees



Product Categories
1, according to the use of conveyor belts can be divided into:

Oil-proof, anti-skid, climbing, acid and alkali transportation, heat, cold, fire, corrosion, moisture, low temperature, high temperature, oil, heat, cold, low temperature, high temperature, acid and alkali resistance conveyor.

2, the conveyor belt can be divided into:

PVC conveyor belt, PU conveyor belt, polyethylene conveyor belt, plastic chain conveyor belt, modular net conveyor belt, polypropylene conveyor belt, nylon conveyor belt, Teflon conveyor belt, stainless steel conveyor belt.

3. Conveyor belts are divided according to heat resistance:

1. Heat-resistant conveyor belt: TI type <100 degree, T2 type <125 degree, T3 type <150 degree

2, high temperature conveyor belt: temperature resistance is not more than 200 degrees

3, anti-cavitation conveyor belt (metal core conveyor belt): temperature 200-500 degrees

Maintenance
1. The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight, rain and snow immersion, and prevent contact with substances affecting rubber quality such as acid, alkali, oil, organic solvent, etc., and 1 meter away from the heating device.

2. The temperature in the warehouse should be kept between -15 °C and +40 °C during storage, and the relative humidity should be kept between 50-80%.

3. The conveyor belt must be placed in a roll during storage, and should not be folded. It should be turned once every season during the placement.

4. The running speed of the conveyor belt should not be more than 5.0 m/s. The transportation block should be large, the material with large wear and the fixed plough type discharging device should be used at low speed. When the specified speed is exceeded, the tape life will be affected.

5. The relationship between the diameter of the drive roller of the transporter and the layer of the conveyor belt, the matching of the drive drum to the drum and the requirements of the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.

6. In order to reduce the impact and wear of the material on the tape, the tape receiving section should shorten the idler spacing and take buffer measures. In order to prevent the tape from being scratched, the contact part of the scraper cleaning device and the unloading device with the tape should be made of a rubber plate of appropriate hardness. Do not use a tape head with a cloth layer.

7. The following matters should be noted during the use of the conveyor belt:

A. Avoid the roller being covered by the material, causing the rotation to be ineffective, preventing the leakage from getting stuck between the roller and the tape. Pay attention to the lubrication of the moving part, but not the oily conveyor belt.

B. Strive to avoid starting with load.

C. When the tape is out of deviation, measures should be taken to correct it.

D. It is found that the local damage of the tape should be repaired in time to avoid expansion.

E. Avoid the tape being blocked by the frame, pillars or block materials to prevent breakage and tearing.

Instructions
1. Prevent the conveyor belt from starting.

2. When the conveyor belt runs off, measures should be taken to correct it in time.

3. Conveyor belts of different types and sizes are not suitable for use together, and the joints are preferably vulcanized.

4. The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

5, the conveyor belt running speed is generally not more than 2.5m / s, block size, large abrasive materials and the use of fixed pear discharge device should try to use low speed.

6. The relationship between the diameter of the drive roller of the roller conveyor and the layer of the conveyor belt, the matching of the drive roller, the reversing roller and the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.

7. The feeding direction should be in the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when the material falls, the chute should be adopted to reduce the material drop distance; the conveyor belt receiving section should shorten the idler spacing and use the buffer roller. In order to leak the material, the conveyor belt adopts a soft and moderate baffle plate to prevent the baffle plate from being too hard and scraping the belt surface of the conveyor belt.

8. When the conveyor is in use, it should be added and repaired in time for the idler. The roller is covered by the material, causing the rotation to be ineffective, preventing the leakage from getting stuck between the roller and the tape. Pay attention to the lubrication of the movable part of the conveyor belt, but Do not oil the conveyor belt.

9. Avoid the conveyor belt being blocked by the frame, pillar or block material to prevent breakage and tearing. When the conveyor belt is partially damaged, the artificial cotton should be repaired in time to avoid expansion.

Belt maintenance
1. Conveyor belts should be kept clean and protected from sunlight or rain or snow to prevent contact with acids, alkali oils, organic solvents and other materials, and one meter away from the heating device.

2. The temperature in the warehouse should be maintained between -18 °C and 40 °C during storage, and the relative temperature should be kept between 50-80% RH.

3. During storage, the product shall be placed in rolls and shall not be folded. It shall be turned once every quarter during the period of storage.

4. Conveyor belts of different types and specifications should not be used together, and the joints are preferably glued.

5. The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

6. The running speed of the conveyor belt is generally not as large as 2.5 m/s. The block size is large, the material with large wear and the fixed plough type discharging device should use low speed as much as possible.

7. The diameter of the transmission drum of the conveyor and the closing of the conveyor belt, the transmission roller, the reversing drum and the requirements for the groove angle of the conveyor should be reasonably selected according to the design regulations of the conveyor.

8. The feeding direction should be in the running direction of the tape. In order to reduce the impact on the tape when the material falls, the chute should be used to reduce the falling distance of the material; the receiving section of the tape should shorten the spacing of the idler and use the buffer roller to prevent leakage. The belt side should adopt a soft and moderate baffle plate to avoid the baffle plate being too hard and scraping the belt surface of the conveyor belt.

9. The conveyor belt should pay attention to the following matters during use:

(1) Avoid the roller being covered by the material, causing the rotation to be ineffective, preventing the leakage of the material from being caught between the roller and the tape, paying attention to the lubrication of the movable part, but not the oily conveyor belt;

(2) Avoid starting with load;

(3) When the tape is deviated, measures should be taken to correct it;

(4) It is found that the local operation of the tape should be repaired in time to avoid expansion;

(5) Avoid the tape being blocked by the frame, pillars or block materials to prevent cracking and tearing